HAVING FUN

The Rift Zone 27.5 is our most playful trail bike, made for the rider that catches a bit of air off of every root in the trail, is always looking for an alternate line, and ends every ride with a smile. This is an all-around suspension bike with trail performance far out stretching the asking price

SPECIFICATIONS

• FRAME

  Series 3 6061 Aluminum Frame, 27.5” Wheels, 120mm Travel, MultiTrac Suspension Platform, 141 Boost Spacing (upgradable to 148x12), 73mm Threaded BB w/ ISCG05 Tabs

• FRONT SUSPENSION

  RockShox Recon Silver RL 27.5", 130mm Travel, Solo Air, Compression and Rebound Adjustment, Alloy Tapered Steerer, Fast Black Uppers, 110x15mm Boost Spacing, Maxle Stealth, 37mm Offset

• REAR SUSPENSION

  X-Fusion O2 Pro R, Custom Tune, 210x50mm, M8x25mm Hardware Top and Bottom

• RIMS

  Marin, Double Wall Alloy, 29mm Inner, Pinned Joint, Disc Specific, 32H, Tubeless Compatible

• HUB, REAR

  Shimano HB-MT200B, 141 QR, Centerlock, Standard Freehub Body

• HUB, FRONT

  Shimano HF-MT400B, 110x15mm, Centerlock

• SPOKE, NIPPLES

  14g Black Stainless Steel

• TIRES

  Vee Tire Crown Gem 27.5x2.3", Dual Control Compound, Tubeless Ready

• DERAILLEUR, REAR

  Shimano Deore, 11 Speed, SGS

• DERAILLEUR, FRONT

  -

• SHIFT LEVER

  Shimano Deore, 11-Speed, SL-5100R

• CRANKSET

  Marin Forged Alloy, Integrated Steel 32T Narrow Wide Chainring, Boost Spacing

• BOTTOM BRACKET

  External Sealed Cartridge Bearing

• CHAIN

  KMC X-11 Silver and Black

• CASSETTE

  SunRace, 11-Speed, 11-51T, ED Black

• BRAKE, FRONT

  Shimano BR-MT200 Hydraulic Disc, 180mm Rotor

• BRAKE, REAR

  Shimano BR-MT200 Hydraulic Disc, 180mm Rotor

• BRAKE LEVERS

  Shimano BL-MT201 Hydraulic

• HANDLEBAR

  Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5 Up, 9 Back

• STEM

  Marin 3D Forged Alloy, 35mm

• GRIPS

  Marin MTN, Closed End

• HEADSET

  FSA No 57E, Semi-Sealed Cartridge Bearings, 1 1/8" x 1 1/2”

• SEATPOST

  Marin Alloy, 30.9mm

• SADDLE

  Marin Speed Concept

• PEDALS

  -

• EXTRAS

  Closed 9-12 Thru-Axle QR System
  

  SUSPENSION SETUP

  REAR SHOCK SETUP

  Recommended Sag =30%/15mm

  Step 1: Set correct pressure in rear shock.

  Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).

  Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.

  Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.

  Step 5: Adjust rebound setting to ensure proper control.

  FORK SETUP

  Marin recommends that all bikes front and rear suspension feel balanced

  Step 1: After rear sag is set follow the recommended pressure from the fork manufacture.

  Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.

  Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.